To adjust the size locate the inner edges of the blade holders against the size graduation. Forexample number “40” for a 1 9/16” (40mm) diameter hole. Hex Key included with replacement springs and pilot drills available to keep your cutter in use for longer

The product also provides protection from falling debris making it a more efficient and hassle-free drilling experience. For diameters greater than 50mm we do not recommend the use of Acceler8% MAX cutters in portable power tools. When using in waterproof boards, if it is required to maintain the integrity of the board, it is advisable to seal around the edges of the rebated cap with silicone sealant or similar.

Mrs Brown

Our holesaws fit standard adaptors - please see our range of Holesaw Accessories for a tip on how to correctly fit your holesaw to your adaptor Acceler8% MAX cutters can be used in standard portable power tools run on rotation only and any power tool with a range of 300 to 1000 rpm. Adjustable width HSS cutting blades can be altered to cut between 40-203mm for the ultimate flexibility. When deep boring - 1” (25mm) up to a maximum - 1 7/8” (46mm) is desired, use the hole cutterfrom one side of the timber, and then start boring again from the other side until the cutting bladesbore a through hole making a doughnut shaped disc, as shown in figure 1, 2, 3. A precision manufactured depth-stop ring and HSS rebating cutters allow SBC caps to precisely locate in the flooring for a neat finish with 100% accuracy.

Armeg’s Solid Board Cutter provides users with a simple and easy solution for drilling access holes in solid board flooring – no need for interjoist sawing. Twin cutting blades provide balanced cutting, reducing the risk of a damaged hole and giving more user comfort. Can be used in mild steel, stainless steel, steel plate, cast iron, aluminium, brass, copper, FRP (i.e. fibreglass) and plastic

When used together with Armeg’s removable solid plug caps, this product produces a neat access hole which lies flush with the floor and allows re-entry for future access requirements. The adjustable width blades allow users to benefit from a cutting diameter range spanning from 40 - 203mm on just one tool. This reduces the need to carry a holesaw for every sizegivinga great cost effective solution.